SIG SAUER MPX / MCX Connection Point for C02 or HPA Remote Paintball Lines
Best Fittings Sig SauerMPX / MCX Connection Point for C02 or HPA Remote Paintball Lines
SIG SAUER MPX / MCX Connection Point for C02 or HPA Remote Paintball Lines running to remote C02 or HPA Paintball Tank.
BEST Fittings have responded to customer demand and produced this kit to run your SIG SAUER MCX or MPX direct from a remote line connected to a standard Co2 or HPA Paintball tank.
A small modification is required to the stock, a 16mm diameter hole will need to be drilled in the underside, just ahead of the butt, to allow the hose to pass through.
Remove the stock and carefully drill a 16mm hole through the underside just ahead of the butt.
Screw the large adaptor from the kit firmly into the action where the 88g cartridge would normally go.
Slide the end of the hose assembly through the hole in the stock leaving the fill nipple outside.
Offer up the stock and screw the hose to the previously installed adaptor.
Pinch up with a pair of spanners.
Slide the stock back onto the action in the normal way.